FAQ

How to clean your glass pipes

• What you need:
• Isopropyl Rubbing Alcohol
• Kosher Salt
• Ziplock Freezer bag
• Metal Coat hanger
• a pair of pliers

1. First take the glass pipe and fill half way up with kosher salt through the mouth piece while holding over a ziplock freezer bag to avoid making a mess. Also, Its easier to get the kosher salt into the pipe while it is dry. Make sure to use a freezer bag because the alcohol eats through thin bags quickly.
2. Next, place the pipe in the "freezer" bag and pour more salt into the bag. Add the alcohol until the pipe it just about fully submerged. Close the freezer bag. Let the glass pipe soak for 5-10 minutes.
3. After soaking, being shaking vigurously with your finger over the mouth and carb hole. You will instantly see the color of the alcohol and salt change to brown from the resin inside the glass pipe. keep shaking until you see the pipe getting cleaner. You can take the pipe out and rinse it under hot water to see the progress, You may also need to add more salt to help scrape off the dirt.
4. For hard to clean areas in the glass pipe household tools such as a hangers or pliers come in handy. Begin by taking the hanger and bend it straight. Insert the hanger through the mouth hole, carb hole or even down the hole in the bottom on the bowl. After getting all you can get off take the pliers and put a slight bend in the end of the hanger to reach around the inside of the glass pipe better.
5. Lastly, after getting all you can offf throw it back into the bag with the kosher salt and alcohol and shake it again till it looks like brand new!

How To Make Homemade Pen and Socket Pipe

• What you need:
• Round Stick Pen with Cap
• Small Socket
• Lighter

1. First take the cap off the pen and snip off the top of it, and the long plastic piece.
2. Now you have to heat the middle of the top and bend it into an elbow (L) shape. You have to do this carefully or you will put holes in the cap. If this happens you can use the plastic piece you snipped off earlier to melt and cover the holes.
3. After soaking, being shaking vigurously with your finger over the mouth and carb hole. You will instantly see the color of the alcohol and salt change to brown from the resin inside the glass pipe. keep shaking until you see the pipe getting cleaner. You can take the pipe out and rinse it under hot water to see the progress, You may also need to add more salt to help scrape off the dirt.
4. After you have turned the cap into an elbow set it aside. Next pull off the very tip of the pen that has the ink tube and ball point part leave the other piece in that comes to a point this will be your mouthpiece.
5. Now wedge the part of the pen cap that used to be the top into the bottom of the socket, not too far though because you don’t want the plastic to heat up when using. You may also want to put a screen inside the socket.
6. Now snip off the back of the pen tube and slide on your elbow and socket on and BAM! You have a pretty nice pipe… Enjoy.

How To Make Homemade Soda Can Pipe

• What you need:
• Empty Soda Can
• Something To Make A Small Hole

1. Very simple to make home made pipe is the soda can pipe push in and make a nice indent in the back of the can. Now take anything you can punch a hole with and put a small hole in the middle of the indent. Also put a hole in the side of the can where your thumb will be for the carb and that’s it…

How To Make Homemade Homemade Tin Foil Pipe

• What you need:
• Tin Foil
• Highlighter

1. First take about a 6” X 9” piece of foil and fold two sides 1” inward to get the shape of an (L).
2. Next, take your highliter and roll the foil with the folds upward around the highliter. You are rolling the 5” side.
3. After it is rolled into a tube stick a pen tip first in the middle of the tube and either crimp or roll ¾ of the foil tube around the pen especially the tip and leave the rest untouched this will be where your tobacco goes.
4. Now slide the pen back a very little and gently fold the untouched part upward being careful not to close the hole at the bottom. Then gently slide out the pen and… Your DONE!

How To Make Homemade Homemade Apple Pipe

• What you need:
• 1 Apple
• Nickel
• Two Pens Or Pencils
• Small Piece of Tinfoil

1. First take the apple and pull out the stem and take the nickel and use it to carve out the top of the apple by spinning it in till you get ¾ of the way in now take a pen and shove it HALF WAY through the apple and leave it in, now comes the tricky part take the other pen and stick it through the side of the apple and try to hit the tip of the 1st pen.
2. After you have succeeded in hitting the 1st pen pull the first pen up a bit and go a little farther in to make the 2 holes meet.
3. Now blow through the apple to make sure you have a clear path, then you place the piece of tin foil in the top of the apple and make a small hole in the bottom of it and done… maybe not. If you really want to try your skills you can make a carb hole where your thumb would naturally be when holding the apple to your mouth. Just take one of the pens and push it in till u meet the other two holes. Then blow through all three holes to make sure there clear, put your tinfoil back in and go to town.

How To Make Homemade Plunger Pipe

• What you need:
• Plunger
• Tape or a piece of plastic wrap and a couple of rubber bands
• A Friend

1. Take the Accordion plunger if it is one piece you just have to make a hole in the top of the handle and maybe one in the bottom part of the plunger. If it is a 2 piece plunger unscrew the handle and make a hole in the bottom and top of the handle and one in the bottom part that u screwed off. Just make sure you have a clear path through the plunger top of handle to bottom.
2. Now you need to take the tape or the plastic wrap and rubber bands and cover the bottom of the plunger, you want to seal it really well. Now you need a slide to put in the top of the handle if you don’t happen to have one you can use the “Homemade Pen and Socket Pipe“ now here is where the friend comes in handy.
3. Have the friend place the bottom of the plunger against their chest and pull the handle towards them as far as they can now you put the slide in the handle of the plunger and light while having your friend SLOWLY let the plunger out.
4. When the plunger is all the way back out and there is a lot of smoke in the plunger place your mouth on the hole where the slide or “Homemade Pen and Socket Pipe“ was and have your friend pull towards them again while you inhale as fast as you think you can handle.